OMARV V1600 Severe Duty Forestry Mulcher: 63" Working Width Mulch & Grind To 8" Dia 75-150HP Tractors
Product Code: V1600-Omarv-Mulcher
Typically In Stock!
Severe Duty 540RPM Large Sump Gearbox Includes an Over-Running Clutch, Which Provides Two Advantages:
First, Easy Alignment & Attachment of the PTO Shaft to the Tractors Output Shaft:
O.R. Clutch Enables Free Spin of the PTO Shaft For Alignment!
Second, Smooth Shut Down:
O.R. Clutch Allows Mower Gearbox to Free-Wheel to a Stop, Eliminating Abrupt Shutdowns & Wear of the Tractors PTO Brake!
1000RPM Gearbox Available Separately.
Heavy Duty Forged & Hardened Steel Hammer Blades Have 360° Swing:
Swinging Hammer Blades Allow Some 'Kick-Back' For Providing Blade Protection When Contacting Boulders, Steel Posts, Or Other 'Non-Vegetation' Fixed Objects.
If Your Ground Is Reasonably Free From Fixed Objects (Boulders, Steel Posts, etc.), Then Consider Our Fixed Tooth Model Which Will Provide More Aggressive Land Clearing Mulching With Better Ground Speeds.
Hydraulically Operated Mulching Door Can Be Operated 'On-The-Fly' To Coordinate Ground Speed & Desired Results In Varied Demands:
Extra Large 9" Dia. Rear Roller Can Be Used For Cutting Height Adjustment Also 'On-The-Fly'!
Open, Close & Full Travel Function Of Rear Mulching Door Also 'On-The-Fly':
Fully Open To Drive Back Over Material To Mulch, Stuffing Material Into The Mulcher, Grinder.
Then Closed (Full or Partially While Driving Forward) If Further Reduction Of Material Is Desired.
Rear Roller Can Provide 2" to 4" Of Working Height Adjustment Via Adjustable Positions & Radius Of Travel.
Double Skinned Mulcher w/Each Deck At 5/16" Thick!
Double Under Deck Mulching Counter Blade Captures & Further Reduces Material.
Extra Wide Single Position Bolt-On Skid Shoes Provide Support On Softest Grounds While Allowing Mulching & Grinding Activity To Be Flush To Grade!
Skid Shoes & All Working Contact Parts Made with Abrasion Resistant Steel!
Front & Rear Radiused Skid Shoes For Contact with Stumps & Prevention of Material Accumulation.
Double Sets of Pull Arm Pin Holes:
Top Holes Are Standard Pin Diameter. Use Pull Arm Draft Control Or Maintain A Desired Elevation To Follow Tractors Pull Arm Position.
Bottom Vertically Oval Pin Holes Allows Mulcher To Follow Terrain With About 4" Of Float At The Pull Arms.
Push Bars Forward Pitch Has Infinite Adjustment Via Turnbuckle.
Grade To Top Of Push Bar is 70" With Pitch As Shown In Photos.
Double Row Of Heavy Duty Front Chain Guards.
The Configuration Of This Mulcher/Grinder Allows For Multiple Efficient Applications:
Land Clearing & Mulching Of Large, Dense & Heavy Stands Of Vegetation.
Drive Over Stump Grinding.
With Rear Roller, This Mulcher Grinder Can Also Be Used As A Super Duty Flail Mower.
